Pro Slot Euro FK-MK1
w/Poly Neo Mags
This motor is based on Pro Slots FK-MK1 series of motors
and features poly/neo magnets, 65 turns of 30 gauge wire, 15 deg
timing, with clockwise rotation from the can side. The shafts are long
enough for Comm Coolers and endbell drive if desired.
The enbells are glued on, the tabs are crimped, they are drilled and
tapped, screws installed can to endbell and our seals are used. These
are the same specs as the current FK motors offered by other companies
in this market place.
PS-4002FK Euro MK1 Motor, 65 turns of 30, 15 deg timing, poly neo
magnets, glued on endbells, crimped tabs, drilled and tapped with screws
installed can to endbell and then covered by our SpeedFX Seals.
Pro Slot recommends gearing the PS-4002FK with a overall gear ratio of
3.25 to 3.75 or to a "roll out" ratio of 4.25 to 4.50.