Pin Hole Reinforcement
"Ninja Stars"

.005 Spring Steel, stops body pin mount tearing. Use double stick scotch tape to hold to body and wrap with high quality strapping tape.

(Six to a pack)
(Picture above is a super blow up picture; actual size is .400" x .275")

Tips for mounting the "Ninja Stars": Mount body first; put double stick scotch tape on outside of body were "ninja star" will mount to; poke pin from underside of body through your mounting hole; lay "Ninja star" over pin (pin is used as a guide so ninja star will be aligned perfect with hole); press "ninja star" onto double stick tape (careful of the pin!) and pull pin out; wrap with strapping tape around inside and outside of body over "ninja star". Your pin will never tare through your body again!