w/ Koford 18t 24g Gr.7 SAW Arms!
Here is one of Kofords latest and hottest Gr. 7 Motors!
With 20 cobalt mags (10 side) and Koford H.P. you can bet it is going to be a rocket!
- Motor: Blue Printed Koford 20 mag
- Endbell: Koford with Gold Plated Hardware
- Armature: Koford K-Blank SAW .490 Gr.7
- Brushes: Koford Vert. Big Foot II w/silver shunts added
This motor is assembled by Koford Engineering. It is assembled from the ground up. The motor setup has been completely Blue Printed starting from straightening the can to the matching and aligning the magnets to the blue printing of the Endbell all by Koford. The armature is inserted and checked to make sure it spins freely and magnets and Endbell parts are clear. The motor is then broken in on Koford's motor analyzer for the final check and to make sure the motor brushes are seated properly. When you receive this motor just solder on the pinion and solder it into your car and your ready to go racing!
Note: Please allow extra time as each motor is custom built to order by Koford.