Analog Racers on Digital Track, please check below for More Details on information you will need.

Notice for Analog racers on digital track; if you have any curved digital lane change track pieces, (C7007 to C7010) in your layout you will need to turn the track over and remove the two screws holding the cover on in the center of the piece of track. If you find a plastic piece with copper jumper connections on it that you need to pull it out. I found a pair of needle nose pilers works good. It was added but found later not to be needed for the track to work in digital mode. Note that if you don't remove the jumper the base will go to overload if you try to run in analog mode.