Mick A of Slot Car City
- Armature: Pro Slot 42 deg. M-2 Gr. 12
- Brushes: Koford Big Foot II
- Springs: Champion D.O. Light
This motor is assembled by Mick A of Slot Car City. (over 29 years experience!) It is painstakingly assembled from the ground up. Completely Blue Printed starting from straightening the can to the matching and aligning the magnets. The Endbell parts are aligned using the Magnahone hood tool and radiusing the motor brushes with the Magnahone brush tool. The armature is inserted and checked to make sure it spins freely and magnets and Endbell parts are clear. The motor is then broken in on our motor analyzer for the final check and to make sure the motor brushes are seated properly. When you receive this motor just solder on the pinion and solder it into your car and your ready to go racing!
Note: Be careful to not overheat the can with your soldering iron as this will weaken the magnet glue.